ADA Braille Signage Requirements: Complete Compliance Guide [2026]

What Are ADA Braille Sign Requirements? (PT)

The Americans with Disabilities Act (ADA) requires braille signage on all permanent rooms and spaces in public buildings throughout the United States. Section 703 of the ADA Standards for Accessible Design specifies exactly how braille must appear on signs to ensure they are readable by blind and visually impaired individuals.

Understanding these requirements is essential for:

Building owners and managers who must comply with accessibility laws
Sign manufacturers producing ADA-compliant signs
Architects and interior designers specifying signage in construction projects
Braille transcribers who create the braille content for signs
Business owners renovating or opening new locations

Non-compliance can result in lawsuits, fines, and required retrofitting — making it far more cost-effective to get it right from the start.

Which Signs Require Braille? (PT)

Signs That MUST Have Braille (PT)

Under ADA guidelines, braille is required on:

Room identification signs: Offices, conference rooms, restrooms, classrooms
Permanent room signs: Any sign identifying a permanent room or space
Restroom signs: All gender-identifying restroom signs
Exit signs: Exit and emergency exit signs at doors
Stairwell signs: Floor level identification in stairwells
Room numbers: All numbered rooms and suites

Signs That Do NOT Require Braille (PT)

Braille is typically not required on:

Directional signs: “Elevator this way” (temporary/informational)
Building directories: Lobby directories listing tenants
Temporary signs: “Closed for renovation” or seasonal signs
Overhead signs: Signs mounted above head height
Parking signs: Standard parking lot signage (except accessible parking)

The Key Rule (PT)

The general principle: if a sign identifies a permanent room or space and is located adjacent to or near the door it identifies, it must include braille.

ADA Braille Technical Specifications (PT)

Grade 2 Braille Is Required (PT)

The ADA mandates that all braille on signs must be Grade 2 (contracted) braille, not Grade 1. This means the braille text must use standard UEB contractions and abbreviations.

Use our text to braille translator set to UEB Grade 2 to generate compliant braille text.

Dome Shape and Size (PT)

Each braille dot must meet specific physical requirements:

Specification	ADA Requirement
Dot height	0.025 inches (0.6 mm) minimum
Dot diameter	0.059 inches (1.5 mm) at base
Dot shape	Domed (rounded), not pointed or flat
Distance between dots (same cell)	0.090 inches (2.3 mm) center to center
Distance between cells	0.241 inches (6.1 mm) center to center
Cell height	0.300 inches (7.6 mm) dot 1 to dot 3

Mounting Height and Location (PT)

Signs must be mounted on the latch side of the door
Center of the sign must be 48 to 60 inches above the floor
Signs must be mounted on the wall adjacent to the door, not on the door itself
Minimum 18 inches from any interior corner

How to Create ADA-Compliant Braille Signs (PT)

Step 1: Determine the Text (PT)

Identify the permanent room name or number: RESTROOM, CONFERENCE ROOM, OFFICE 101, EXIT, STAIRWELL, etc.

Step 2: Generate Grade 2 Braille (PT)

Use our braille translator:

Select “UEB Grade 2” from the language dropdown
Enter your sign text
Copy the braille output
Verify with our braille lookup tool

Step 3: Design the Sign (PT)

Your sign must include:

Visual text: Raised or recessed characters (sans-serif recommended)
Tactile text: Raised characters between 5/8 inch and 2 inches tall
Grade 2 braille: Positioned below the visual text

Common ADA Braille Sign Mistakes (PT)

1. Using Grade 1 Instead of Grade 2 (PT)

This is the most common error. ADA explicitly requires Grade 2 (contracted) braille.

2. Incorrect Dot Height (PT)

Braille dots that are too flat will not be readable by touch. The domed shape at exactly 0.025 inch height is critical.

3. Wrong Mounting Location (PT)

Signs mounted on doors instead of walls, at incorrect heights, or on the hinge side of the door are all violations.

4. Missing Braille Entirely (PT)

Some sign makers only include raised tactile text without braille. Braille is a separate, mandatory requirement.

5. Incorrect Spacing (PT)

Dot spacing and cell spacing that doesn’t match ADA specifications makes the braille unreadable.

Restroom Sign Requirements (PT)

Restroom signs have additional specific requirements:

Must include the appropriate geometric symbol: Triangle for men, Circle for women
Symbols must be raised and tactile
The word (MEN, WOMEN, etc.) must appear in both raised text and Grade 2 braille
All-gender restrooms must clearly indicate availability to all

Penalties for Non-Compliance (PT)

Failure to comply with ADA signage requirements can result in:

Civil lawsuits: Individuals can sue businesses for ADA violations
Fines: First violations up to $75,000; subsequent violations up to $150,000
Required remediation: Forced to replace all non-compliant signs

International Braille Signage Standards (PT)

Country/Region	Standard	Key Differences
United States	ADA Section 703	Grade 2 UEB required
United Kingdom	BS 8300 / Equality Act	Grade 2 UEB, similar specs
European Union	EN 15209	Varies by member state
Canada	CSA B651	Grade 2, similar to ADA
Australia	AS 1428	Grade 2 UEB required

Tools for Creating Compliant Braille (PT)

Our free tools can help:

Text to Braille Translator — Generate Grade 2 braille for sign text
Braille to Text — Verify your braille translates back correctly
Braille Lookup Tool — Check individual contractions
Download as BRF — Download braille files for professional embossing

ADA Braille Signage Requirements: Complete Compliance Guide [2026] (PT)